Introduction
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. YZXQ-1A is an advanced hydraulic water-cooling automatic sample mounting press. The mounting process is controlled by the program, which realizes the one-key operation of heating, loading, holding, cooling and unloading process. The sample mounting is automatically completed with sound and light alarm function, without the need of the operator on duty. The machine adopts hydraulic pump with higher pressure, which makes the sample more compact. The cavity is lengthened and so two samples can be completed at the same time by using the middle block. Unique cold and heat separation design makes it more safe and stable. High-definition touch screen displays pressure and temperature in real time. With water cooling system, it can finish two samples mounting at same time, which makes sample preparation easier and more labor saving, the mounting quality is also better and more stable.
Technical Parameters
|
Model |
YZXQ-1A |
|
Mould Diameter |
Ф25mm,Ф30mm,Ф40mm (Choose one) |
|
Cavity Height |
140mm, effective 85mm, can make two samples at same time |
|
Heating Power |
Ф25mm/Ф30mm 1.5kW; Ф40mm 2kW |
|
Pressure |
50~200bar (The default is 150bar, equivalent to 15Mpa, 150kgf/cm2) |
|
Heating Temperature |
0~250℃ |
|
Hold Time |
0~99min |
|
Total Time |
8-9min for two samples Ф30mm |
|
Cooling Method |
External water source cooling |
|
Power Supply |
220V, 50Hz,10A |
|
Dimensions |
530×510×480mm |
|
Net Weight |
60Kg |
Packing List
|
Name |
Specification |
Qty |
|
Machine Body |
1 set |
|
|
Middle Mould Block |
1 pc |
|
|
Water Inlet Pipe |
1 pc |
|
|
Water Outlet Pipe |
Ф10mm |
1 pc |
|
Water Inlet Filter Screen |
1 pc |
|
|
Hoop |
1 pc |
|
|
Bakelite Powder |
500g |
1 bottle |
|
Funnel |
1 pc |
|
|
Measuring Cup |
1 pc |
|
|
Inner Hexagon Spanner |
5mm |
1 pc |
|
Brush |
1 pc |
|
|
Usage Instruction Manual |
1 copy |
FAQ
Q: Should I choose manual hardness tester or fully automatic hardness tester?
A: It mainly depends on your testing requirements. Manual hardness testers are inexpensive and have a sturdy and durable mechanical structure, but they rely on the skills and experience of operators, resulting in lower testing efficiency. The fully automatic hardness tester can achieve one click measurement, with high efficiency and good consistency of results, suitable for large-scale testing.
Q: How should the force range be determined when selecting a hardness tester?
A: The choice of force range for a hardness tester directly depends on the hardness testing scale you need to use. Each standard hardness scale strictly specifies its corresponding test force and indenter type. You need to determine the required ruler based on the tested material and application standards, and the standard force value corresponding to the ruler is the range you should choose.
Q: Can we provide non-standard customized equipment?
A: Of course. As a professional test machine manufacturer, we possess strong R&D and design capabilities. If you have special test fixtures, test environments (such as high and low temperatures), control logic, or data analysis requirements, we can provide you with professional customized solutions.
Hot Tags: automatic hot mounting press, China automatic hot mounting press manufacturers, suppliers, factory, automatic mounting press, automatic mounting press machine
