Introduction
Mounting is a very important process of metallographic sample preparation, especially for some difficult holding tiny samples, irregularly shaped samples, and what needs for protecting edge or automatic grinding and polishing, mounting is an essential procedure before sample preparation. ZKXQ-1 vacuum mounting press has a compact design, large capacity, simple and fast operation, and high reliability. The built-in vacuum pump can quickly and effectively evacuate, suitable for vacuum cold mounting of epoxy resin. It can effectively remove bubbles in the sample and resin, allowing the resin to penetrate into the pores and cracks of the sample, obtaining a sample without bubbles and pores, and improving the final mounting effect of the sample. It is very suitable for porous materials, such as the preparation of failure analysis specimens for cracks, porous castings, and composite materials, and electronic components, rock minerals, ceramics, etc.
Features
- Built in low-noise vacuum pump, fast vacuuming speed, high vacuum degree.
- Fully transparent large vacuum chamber, capable of accommodating up to 12 samples (Ф40mm).
- Electric rotary table, manual knob pouring, convenient and fast.
- Program control, capable of setting vacuum degree, number of cycles and corresponding time, automatically completing the entire mounting process of multiple samples vacuuming, maintaining vacuum, and venting cycles.
- According to different materials and samples, 80 sets of process parameters can be saved and called up.
Detail Pictures
Technical Parameters
|
Model |
ZKXQ-1 |
|
Vacuum Degree |
0~-75kPa, Vacuum Pump 0~-90kPa |
|
Default Vacuum Degree |
-70kPa |
|
Vacuum Flow |
10~20L/min |
|
Vacuum Chamber Dimensions |
Φ250mm×85mm, accommodating up to 12 samples (Ф40mm) |
|
Work Disc Control |
Button jog, Clockwise and counterclockwise rotating |
|
Operation |
7 inch touch screen, Manual knob pouring |
|
Timing Cycle |
0~99min, Automatic vacuuming /venting, Automatic circulation |
|
Max. Number of Cycles |
99 |
|
Program |
80 groups |
|
Power Supply |
220V, 50Hz,10A |
|
Dimensions |
462×400×310mm |
|
Net Weight |
24kg |
Packing List
|
Name |
Specification |
Qty |
|
Machine Body |
1 set |
|
|
Large Cushion Plate |
1 pc |
|
|
Cold Mounting Mould |
25/30/40mm |
5 pcs |
|
Epoxy Cold Mounting Set |
Resin 500ml+Liquid 250ml |
1 set |
|
Disposable Pouring Connector |
5 pcs |
|
|
Disposable Paper Cup |
5 pcs |
|
|
Stirring Rod |
5 pcs |
|
|
Oil Paper |
5 pcs |
|
|
Usage Instruction Manual |
1 copy |
FAQ
Q: Should I choose manual hardness tester or fully automatic hardness tester?
A: It mainly depends on your testing requirements. Manual hardness testers are inexpensive and have a sturdy and durable mechanical structure, but they rely on the skills and experience of operators, resulting in lower testing efficiency. The fully automatic hardness tester can achieve one click measurement, with high efficiency and good consistency of results, suitable for large-scale testing.
Q: How should the force range be determined when selecting a hardness tester?
A: The choice of force range for a hardness tester directly depends on the hardness testing scale you need to use. Each standard hardness scale strictly specifies its corresponding test force and indenter type. You need to determine the required ruler based on the tested material and application standards, and the standard force value corresponding to the ruler is the range you should choose.
Q: Can we provide non-standard customized equipment?
A: Of course. As a professional test machine manufacturer, we possess strong R&D and design capabilities. If you have special test fixtures, test environments (such as high and low temperatures), control logic, or data analysis requirements, we can provide you with professional customized solutions.
Hot Tags: vacuum mounting press, China vacuum mounting press manufacturers, suppliers, factory, automatic mounting press, automatic mounting press machine
