Introduction
Cutting is the first important procedure in the process of the sample preparation. This machine is suitable for the general lithofacies materials. The shell, axle sleeve, jaw, work table and other main parts are all made of stainless steel, which can endure long time. It adopts quick clamp for manual feeding which is very convenient to operate. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for cutting lithofacies samples.
Technical Parameters
|
Model |
QG-2 |
|
Cutting Method |
Manual, Clamp feeding along Y axis |
|
Cut-off Wheel |
Φ250×2×Φ32mm |
|
Max. Cutting Capacity |
65×65mm |
|
Spindle Speed |
1400r/min |
|
Electromotor Power |
1.1kW |
|
Clamping Tool |
Stainless steel clamp,Jaw height 52mm |
|
Power Supply |
380V, 50Hz,6A, Three-phase four-wire |
|
Dimensions |
490×600×330mm |
|
Net Weight |
45kg |
|
Water Tank Capacity |
36L |
|
Pump Flow |
12L/min |
|
Water Tank Dimensions |
300×500×450mm |
|
Water Tank Weight |
20kg |
Packing List
|
Name |
Specification |
Qty |
|
Machine Body |
1 set |
|
|
Water Tank |
1 set |
|
|
Cut-off Wheel |
Φ250×2×Φ32mm Diamond cut-off wheel |
1 pc |
|
Cutting Fluid |
3kg |
1 bottle |
|
Clamp |
1 pc |
|
|
Plexiglass Shield |
1 pc |
|
|
Spanner |
36mm, 24×27mm |
each 1 pc |
|
Water Inlet Pipe |
1/2 Metal pipe |
1 pc |
|
Water Outlet Pipe |
Φ32mm |
1 pc |
|
Usage Instruction Manual |
1 copy |
FAQ
Q: How should fixtures be selected and maintained?
A: The selection of fixtures depends on the shape, material, and testing type of the sample. We offer a variety of conventional fixtures, and can also customize matching fixtures according to the shape of the sample. During maintenance, it is necessary to keep the fixtures clean, avoid collisions, and regularly apply rust proof oil.
Q: What should be done if abnormal noise or vibration occurs during equipment operation?
A: Please press the emergency stop button immediately to stop the test. Firstly, check if the equipment is placed horizontally and if the sample is placed correctly. If the problem persists, please contact our after-sales service department promptly.
Q: How to perform daily maintenance and upkeep on equipment?
A: Routine maintenance includes: keeping the equipment clean; regularly inspecting transmission components and adding appropriate lubricant; avoiding overloading the equipment; and periodically powering it on during long-term inactivity. Please refer to the accompanying "User and Maintenance Manual" for specific maintenance cycles and methods.
Hot Tags: manual specimen core cutting machine, China manual specimen core cutting machine manufacturers, suppliers, factory, cut off saw machine, cutting machine manual, the laser machine, hand press paper cutting machine, cnc cutting system, all in one cutting machine
