Introduction
This machine is suitable for various metallographic materials. The cutting thickness of the material can be adjusted by the lateral movement of the cutting table, and then the sample can be cut by the longitudinal movement of the spindle, which has strong cutting ability and convenient operation. The main parts of the clamp and cutting table are all made of stainless steel, which has long service life and convenient maintenance. The cutting chamber adopts closed structure with safety limit switch, and it has the transparent plexiglass window and built-in LED lamp for observation when cutting. With cabinet structure, it is easy to store all kinds of cutting consumables. With circulating cooling water tank, the surface of the sample after cutting is bright and flat without burns, thus it is the ideal equipment for sample cutting.
Technical Parameters
|
Model |
QG-4A |
|
Cutting Method |
Manual, Spindle feeding along Y axis |
|
Cut-off Wheel |
Φ250×2×Φ32mm |
|
Max. Cutting Capacity |
65×65mm |
|
X Axis Travel |
45mm |
|
Y Axis Travel |
150mm |
|
Spindle Speed |
2800r/min |
|
Electromotor Power |
1.5kW |
|
Cutting Table (X*Y) |
130×190mm,T-slot 12mm |
|
Clamping Tool |
Quick clamp,Jaw height 60mm |
|
Power Supply |
380V, 50Hz,6A, Three-phase four-wire |
|
Dimensions |
700×520×1110mm |
|
Net Weight |
170kg |
|
Water Tank Capacity |
60L |
|
Pump Flow |
25L/min |
|
Water Tank Dimensions |
565×360×600mm |
|
Water Tank Weight |
27kg |
Packing List
|
Name |
Specification |
Qty |
|
Machine Body |
1 set |
|
|
Water Tank |
1 set |
|
|
Cut-off Wheel |
Φ250×2×Φ32mm Resin cut-off wheel |
1 pc |
|
Cutting Fluid |
3kg |
1 bottle |
|
Spanner |
36mm, 14×17mm, 24×27mm |
each 1 pc |
|
Water Inlet Pipe |
1/2 Metal pipe |
1 pc |
|
Water Outlet Pipe |
Φ32mm |
1 pc |
|
Usage Instruction Manual |
1 copy |
FAQ
Q: How is the accuracy and load sensor of the testing machine ensured?
A: We utilize high-precision load sensors, all of which are strictly calibrated before leaving the factory and traceable to national metrological standards. The overall accuracy of the equipment typically exceeds ±0.5%, with some models achieving up to ±0.2%. We recommend users undergo periodic third-party metrological verification (usually annually) to ensure long-term accuracy.
Q: What functions does your experimental software support?
A: The system is linked to a hardness tester through a serial port to achieve test force sensing, turret/loading control, and automatic reading. It supports automatic focusing and image acquisition. Automatically measure indentation vertices, support diagonal/four point measurement, and automatically convert hardness values such as Brinell and Rockwell. Generate graphic and textual reports, collect multiple indentation data, easy to operate, and can be mastered in half a day of training. It can still stably read non ideal indentation, with both manual/automatic reading, hardness conversion, and report generation functions, and good repeatability.
Q: Can the software be customized?
A: Yes. We offer a certain level of software customization services, allowing us to add or modify test procedures, control logic, report formats, and data analysis functions based on your specific testing requirements.
Hot Tags: manual metallographic cutting machine, China manual metallographic cutting machine manufacturers, suppliers, factory, cut off saw machine, cutting machine manual, the laser machine, hand press paper cutting machine, cnc cutting system, all in one cutting machine
